Energy-Efficient Ahu with Filtration Humidity Control - Factory Direct Wholesale Price

Product Description

                                       Vertical Type Air Handling Unit

Product Description

 

 

Product Parameters

 

Modle/Parameters	Air volume m3/h	Full external pressure/Pa	Motor Power/kw	Number of heat exchanger rows	Cooling capacity/kw	Heating capacity/kw	cooling water flow m3/h	Heating water flow/m3/h	Noise dB(A)
ZKW(X)/ZKL(X)-03	3000	80	0.55	4	24.5	32.5	4.21	2.8	55
		150	0.75	6	33.6	44.1	5.78	3.8	61
		300	0.75	8	43.6	57.9	7.5	4.98	68
ZKW(X)/ZKL(X)-04	4000	80	0.75	4	32.4	42.8	5.57	3.68	57
		150	0.75	6	43.7	58.7	7.51	5.05	64
		300	1.1	8	57.6	76.3	9.9	6.6	72
ZKW(X)/ZKL(X)-05	5000	100	0.8	4	40.8	53.6	7.02	4.61	59
		200	1.1	6	55.7	73.4	9.58	6.31	66
		350	1.8	8	72.7	95.4	12.5	8.2	74
ZKW(X)/ZKL(X)-06	6000	150	1.1	4	49	63.5	8.43	5.46	62
		300	1.5	6	66.9	87.9	11.5	7.56	68
		400	1.8	8	87.2	113.3	15	9.74	75
ZKW(X)/ZKL(X)-07	7000	150	1.5	4	57.2	74.5	9.84	6.41	63
		300	2.2	6	87.4	117.3	13.5	10.1	70
		400	3	8	102	152.3	17.5	13.1	76
ZKW(X)/ZKL(X)-08	8000	150	2*08	4	65.4	85.6	11.2	7.4	64
		300	2*1.5	6	90.9	117.3	15.6	10.1	66
		400	3	8	116.3	152.3	20.0	13.1	73
ZKW(X)/ZKL(X)-09	9000	150	2*1.1	4	77.1	95.4	13.3	8.2	65
		350	2*1.5	6	103.8	131.4	17.8	11.3	67
		450	4	8	137.1	169.8	23.6	14.6	75
ZKW(X)/ZKL(X)-10	10000	150	2*1.1	4	88.2	107.2	15.2	9.2	65
		350	2*1.8	6	112.2	146.7	19.3	12.7	71
		450	4	8	156.9	190.7	27.0	16.4	78
ZKW(X)/ZKL(X)-15	15000	150	2*1.5	4	134.2	160.7	23.1	13.8	71
		350	2*2.2	6	170.9	220.1	29.4	18.9	73
		450	7.5	8	238.7	286.0	41.0	24.6	77
ZKW(X)/ZKL(X)-20	20000	200	2*3	4	180.4	211.7	31.0	18.2	71
		400	2*4	6	244.2	293.1	42.0	25.2	76
		450	11	8	320.9	376.7	55.2	32.4	78
ZKW(X)/ZKL(X)-25	25000	250	2*3	4	226.8	264.7	39.0	22.8	78
		450	2*4	6	304.7	366.3	52.4	31.5	80
		550	15	8	403.5	470.9	69.4	40.5	83
ZKW(X)/ZKL(X)-30	30000	250	2*4	4	262.9	218.3	45.2	27.4	79
		450	2*5.5	6	366.3	438.3	63.0	37.7	81
		550	18.5	8	476.7	566.3	82.0	48.7	83
ZKW(X)/ZKL(X)-40	40000	300	2*5.5	4	357.1	423.5	61.4	36.4	78
		400	2*7.5	6	487.3	584	83.8	50.2	80
		600	18.5	8	635.4	753.5	109.3	64.8	84

Certifications

 

Packaging & Shipping

 

 

 

Installation Instructions

1. The Ceiling air handling unit should be installed inside the ceiling

Compartment, the side of the condensate pipe is allowed to be as

As five thousands, and the flip is not allowed to be high to ensure the

Smooth discharge of condensate. There should be sufficient space for                               

Installation and maintenance around the unit.

2.The condensate discharge connected to the unit must be sealed

With a sufficient height.

3.The condensing water connection pipe of the table is lower in and up,

and the globe vale and filter should be installed at

The inlet

4.The air duct connected to the unit should be flexibly connected ,

and the water pipe connected to the unit should adopt a flexible nozzle, and

The torque during the takeover should not to be too large, so as not to damage the heat exchanger , the

pipeline must have a separate bracket and the weight shall not be borne by the unit.

5.The power supply of the unit is 380V,50HZ. The power supply meets the requirements to connect

with the motor, after,The power supply is connected, it should be checked whether the fan steering is

correct, if reversed, it should be stopped to change the power supply phase sequence.

Notice:1,H=P/10+20(mm)

2,P is the maximum negative pressure of the unit(mmH2O)

Operation and Maintenance of the Units

1.The unit cooler and heat medium should be clean demineralized water, and its working pressure

should not exceed 1.5Mpa

2.During the normal operation of the unit, the temperature rise of the fan bearing does not exceed

40 degrees 3.The outlet pipe of the unit is equipped with an exhaust valve,before the first operation

and the conversion between hot and cold, the air valve should be opened to drain the air in the heat

exchanger and the pipeline so as not to affect the heat exchanger effect. The unit provides cold

water temperature of not less than 5 degrees is summer and no more than 80 degrees celsius in

winter.

4.In the cold areas of winter and the new fan unit, when the heating mechanism is opened, the

heater should

be opened for 5-10 minutes before the fan supply should be started, prevents large amounts of

cold air from forming an ice plug in the heat exchanger, when the machine is stopped, the fresh

air valve should be closed first, the heater should be closed, and finally the blower should be

closed.

5.When the unit is not used in winter, the water in the coil should be drained and dried a with

a compressor, if the stored water cannot be blown clean, antifreeze should be added to

the tube, if the unit is temporarily running in winter for a short time, it should ensure that

there is hot water circulation in the pipe to prevent rust and freeze , in addition to winter,

when the heat exchanger is deactivated in other seasons, the heat exchanger should also be

filled with water to reduce rust. 6.The filter should be cleaned regularly to ensure the use of

the unit effect, such as the air volume is found to be reduced, generally caused by too much filter

dust.

7.After one month of operation of the unit, it is necessary to check whether the hoisting fasteners

and fan tightening bolts are loose.After two to three years of operation, the unit should be fully

maintained to clear the scale in the heat exchanger tube. Wash the heat exchanger fins with

compressed air or water, Lubricating parts such as fans and motors should be filled with lubricating

oil regularly.

Company Profile

Shandong XUGUANG Tank Air Conditioning Equipment Co., Ltd. was established in 2008, It is the supplier of the overall product at the end of the central air conditioning system, set composite materials, fresh air equipment, fire smoke exhaust equipment and other products research and development, design, production, sales as one of the modern enterprises. Our products have been installed in many countries such as the Russian Federation, Southeast Asia, America,  and so on. The business scope includes a central air conditioning system, FCU, AHU, Fresh air ventilation, Water tanks etc.
The Company has the Fire Protection Product Certification of the Ministry of Emergency Management, CRAA China refrigeration and air conditioning industry authority product performance certification, The water tank molded products won the health license certification of the Shandong Provincial Health Department.  It has passed IS09001 International Quality Management System Certification, IS014001 International Environmental Management System Certification and OHSAS18001 Occupational health and Safety Management System Certification  

Our Advantages

FAQ

 

1 Are you a trading company or a manufacturer?
A: We are a manufacturer as you can see in our workshop as above.
2. What information of AHU do you need to provide to get a quotation? 
 Generally, for Air Handling Unit we need to know the following information:
 1) Cooling capacity;
2) Air volume, fresh air volume? 
3) Static pressure & Air filter etc; 
4) Chilled water type
or DX type with outdoor unit?
 5) Application of the air handling unit?
 6) Other special requirements?
3.  What is the warranty of products? 
 For 1 year warranty. Free to amend and change the parts due to quality reasons in warranty year.

1.  What is your payment term?
   A:Normally T/T 30% in advance, balance to be paid before delivery.